Norco Fluid FS A2 | Mountain Bike

The Norco Fluid FS A2 is built to obliterate the line between value and performance in the trail-bike world. Engineered around a progressive 6061 alloy frame with 130mm of rear travel paired with 140mm up front, it delivers confident geometry, supple suspension, and a playful, capable ride from technical climbs to fast, rocky descents - all backed by Norco's signature Ride Aligned™ Design System that tunes geometry and suspension specifically for each frame size.

RIDE ALIGNED DESIGN: Every Fluid FS frame size gets its own custom geometry and suspension tune calibrated to rider weight and proportions, so a smaller rider on an S2 gets the same balanced feel as a taller rider on an S5. The Ride Aligned Setup Guide makes it easy to dial in fit, suspension pressures, and tire pressures to your body and your trails.

PROGRESSIVE TRAIL GEOMETRY: A slack head tube angle, steeper seat tube, and roomy reach put you in a centered, confident position — stable in the rough, agile in the tight, and efficient on the climbs.

FOUR-BAR HORST LINK SUSPENSION: The proven Horst-link platform delivers active, supple suspension that stays composed under braking and pedaling, soaking up roots and rocks without robbing power.

BUILT TO LAST: Internal cable routing, SRAM UDH (Universal Derailleur Hanger), and Boost hub spacing front and rear make the Fluid FS A2 ready for whatever the trail throws at it — and easy to keep rolling for the long haul.

• 6061 alloy frame with 130mm of rear travel, Four-Bar Horst Link suspension
• RockShox Psylo Gold 140mm fork with Isolator RC damper
• Fox Float X Performance Elite rear shock with 2-position compression lever
• Shimano Deore 12-speed drivetrain with 10-51T cassette
• TRP Slate EVO 4-piston hydraulic disc brakes with 203mm front / 180mm rear rotors
• TranzX YSI34 dropper post (size-specific travel up to 200mm)
• SRAM UDH derailleur hanger; Boost hub spacing front and rear

SPECIFICATIONS
FRAME – Fluid FS 6061 Alloy, 130mm of travel, Four-Bar Horst Link suspension, SRAM UDH compatible, internal cable routing, Boost 148 rear spacing
FORK – RockShox Psylo Gold, 140mm travel, 29", 44mm offset, Isolator RC damper, 15x110mm Boost
REAR SHOCK – Fox Float X Performance Elite, EVOL LV, 2-position compression lever, low-speed compression adjust, low-speed rebound adjust, custom tune, 210x50mm
FRONT WHEEL – Bear Pawls BMB-013 hub, 15x110mm Boost, sealed bearings, alloy rim, tubeless ready, 29"
REAR WHEEL – Bear Pawls BMB-004 hub, 12x148mm Boost, Micro Spline driver, sealed bearings, alloy rim, tubeless ready, 29"
FRONT TIRE – Maxxis trail-spec, tubeless ready, 29x2.4"
REAR TIRE – Maxxis trail-spec, tubeless ready, 29x2.4"
CRANKSET – Praxis G2 Cadet M24, 30T chainring, size-specific arm length
CHAINRING – 30T
REAR DERAILLEUR – Shimano Deore RD-M6100, Shadow Plus, 12-speed
SHIFT LEVER – Shimano Deore SL-M6100-R, 12-speed
CASSETTE – Shimano Deore CS-M6100-12, 10-51T, 12-speed
CHAIN – Shimano Deore CN-M6100, 12-speed
BOTTOM BRACKET – Praxis M24 BSA threaded
FRONT BRAKE – TRP Slate EVO, 4-piston caliper, hydraulic disc, metallic pads, TRP RS01E 203mm rotor
REAR BRAKE – TRP Slate EVO, 4-piston caliper, hydraulic disc, metallic pads, TRP RS01E 180mm rotor
BRAKE LEVERS – TRP Slate EVO
HANDLEBAR – Norco 6061 DB Alloy, 800mm width, 25mm rise
STEM – Norco 6061 Alloy, 40mm length, 35mm bar bore
HEADSET – Zero Stack sealed cartridge bearings, tapered
SEAT POST – TranzX YSI34 Dropper, 34.9mm, size-specific travel (150-200mm)
SADDLE – SDG Bel Air V3
GRIPS – WTB Wavelength
PEDALS – VP Nylon Flat